Siemens FS20 - Installation

Mounting and installation of the compact control panels
Power supply (70 W)
5
95 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.6.1 Installation
The 70 W power supply FP2001-A1 or the FP2015-A1, which is identical in
construction, is only installed in Standard and Eco housings.
Figure 41: Example: Installation of the power supply (70 W) in the Standard housing
1 Fixing screw (under mains connection terminal X1)
2 Power supply (70 W) FP2015
3 Guides for the distance pins of the power supply unit
X1 Mains connection terminal primary wiring
X2 Supply output secondary wiring
1. On the rear side of the power supply, insert the pins laterally into the guides (3)
in the rear panel.
2. Fasten the power supply (2) (under the mains connection terminal X1) using
the Phillips screw (1).
3. Mount the mains connection terminals onto the power supply (over the fixing
screw).
4. Connect the power supply according to the following pin assignment.
X2
X1
3
2
1