Mounting and installation of the compact control panels
5
261 |
Building Technologies
Position Type Component/task Comment Complete
23 FTO2001-A1 Install event printer
An RS232 module must also be fitted
to slot 1
24 FTO2005-A1 Install a key switch (Kaba) –
25 –
Install a Redux module
[DE]
Only for Germany
26 FDCIO224
Install input / output
module [DE]
–
27 FCA2005-A1 Install sounder module
Max. 2 depending on the periphery
board
28 FCI2005-N1 Install RT Interface [NL] Only for Netherlands
29 FCI2006-C1 Install RT interface [CH] Only for Switzerland
30 FCA2014-A1
Install cable kit
(communication)
–
31 Insert license key Only 1 license key per station
32 FHA2019-A1 Install the 19" mounting kit –
33 FHA2015-A1
FHA2017-A1
Fitting FM blind
Also refer to document 008843,
Installing formwork boxes
34 – Install batteries Only connect during commissioning
35 FCM2008-N1
Install operating add-on
with EVAC
Only for Netherlands
36
Remote EVAC-
NL
● Operating add-on
FCM2008-N1
● EVAC-NL mimic
display driver FT2003-
N1
Only for Netherlands
37 FCA2009-A1 Install door contact kit Only for Germany
Table 5: Installation checklist
Due date: Ordering unit: Date
Table 6: Ordering unit for installation work
To Next Page
Loading...
