6
100 | 412
6.26.5 Import information report
The 'Import information report' outputs a list of imported elements and their IDs
following completion of an import from inventory systems.
● Create report link [➙ 95]
The following filter settings are possible:
● 'Whole site' creates a report for the entire ↑ 'Site'
● 'Selected station' creates a report for the selected ↑ 'Station'
6.26.6 Node report
In the 'Node report', the element of the respective task card highlighted in the tree
view is listed in table format.
● Create report link [➙ 95]
You can make the following settings in the 'Settings' section:
● 'Full property set': All visible properties of the highlighted element are output.
● 'Property subset': A subset of the properties is output. The selection is
dependent on the ↑ BDV used.
● 'Include sub-tree' This setting indicates whether only the highlighted elements
will be output or also the subtree as well.
● 'Displayed bottom level of the tree': Lowermost level of the structure tree that is
displayed in the report.
Not all settings are available in the task cards '
To Next Page
Loading...
