Siemens FS720 - Checklist for Network and Bacnet Configuration

'Network' task card
Checklist for network and
BACnet configuration
14
340 | 412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
14.9 Checklist for network and BACnet configuration
The checklists below list settings that must be entered and / or checked for
↑ BACnet integration.
Checklist for network configuration
Figure 161: Example of network configuration
Element in the structure tree Configuration in the detail editor Required setting/value
'Ethernet sub-net' 'Netmask' 255.255.255.0
'GAP' 'DHCP server enabled' Depending on network configuration
'SAFEDLINK sub-net' 'Netmask' 255.255.255.0
'Network speed' Standard
'Router' 'Router Ethernet IP address' 192.168.x.x
Table 19: Checklist for network configuration