12
180 | 412
12.2.2 Properties of the assigned effect elements
You can set additional properties in the assigned effect elements of an ↑ alarming
control. The settings are described in the following sections.
If the ↑ effect is assigned to an RT channel, you can set the following:
Figure 62: Settings in the detail editor of an assigned RT channel
'OFF allowed while AVC active (t1/t2)'
This setting specifies whether the ↑ RT channel may be switched off while the
↑ AVC is active i.e., while the times t1 and t2 are running.
Independent of this setting, the 'ÜE ab' command is always executed by a fire
brigade operating panel (FDOP).
'Minimal duration of activation'
This setting specifies the minimum period during which the ↑ RT channel remains
active even if the cause for triggering is no longer available.
If the effect is assigned to a sounder line, you can set the following:
Figure 63: Settings in the detail editor of an assigned sounder line
To Next Page
Loading...
