Siemens FS720 - Creating a New Site

Program operation
Cr
eating a site
6
64 | 412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
6.1.3 Creating a new 'site'
NOTICE
Unauthorized characters in the
↑
'
Site
' name or in the path: <
>
/
\
|
:
?
*
"
%
#
'Site' may not be able to be saved or loaded.
● Do not use any of the following characters in the 'Site' name or in the path:
< > /
\
| : ? * " % #
Use as a test site
To identify a 'Site' as a test site, the value 'Test site' must be set in the properties
for 'LRC site usage'. The 'Site' identified as a test site must not be used for actual
fire detection in a customer site. When site data is evaluated on the LRC server, a
distinction is made between a test site and a customer site. All site data is loaded
onto the LRC server, regardless of how it has been identified.
1. Launch Engineering Tool.
2. Select 'File' > 'New site' from the menu bar or click on in the toolbar.
a The 'Create new site' window opens.
3. Select the 'Create new' option.
4. Select the ↑ BDV.
5. Click on 'Next'.
a The BDV is being loaded.
a The 'Create new site' window opens.
6. Enter the required information, e.g., the ↑ 'Site' name. Mandatory fields are
highlighted with an asterisk (*).
7. Click on 'Create'.
a The 'Site' is created.
See also
2 Editing 'site' properties [➙ 65]