Siemens FS720 - 9 Configuration -Overview

Configuration
–
Overview
Con
verting a station
9
113 |
412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
9 Configuration –Overview
A 'Site' has a physical and a logical structure. The structures are shown and
configured in the Cerberus-Engineering-Tool task cards. The table below shows
elements and assignment of the appropriate structure.
Structure type Structure tree Task card
Physical structure ↑ Hardware tree 'Hardware'
Logical structure ↑ Detection tree
↑ Control tree
Operation tree
↑ Network tree
'Detection'
'Control'
'Operation'
'Network'
The physical structure is read in by the ↑ 'Station' or created manually. The logical
structure can be created either manually during the ↑ pre-configuration or
automatically on the 'Station' by auto-configuration. Parts of the logical structure
are pre-configured in the ↑ BDV template for a 'Station'.
The list below shows a selection of configurable elements in a ↑ 'Site':
● Configuring the components of the 'Station'
● Detector zones
● Detector settings
● ↑ Multi-detector dependency
● ↑ Alarm organization
● Controls (alarming, fire, NAC, extinguishing)
● Networking control panels and operating panels ('Stations')
● ↑ Visibility for events and functions
● Service intervention
● Customer texts
● Intervention texts