Siemens FS720 - 12 Control Task Card; Creating Control Tree

'Control' task card
Creating control tree
12
175 |
412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
12 'Control' task card
Controls are configured in the 'Control' task card. The controls are combined into
the following ↑ control groups:
● 'Alarming control group': Controls for internal and external sounders and
remote transmission outputs for Fire and Fault.
● ↑ 'Fire control group': Controls for building equipment.
● 'Evac control group': Controls for ↑ alarm and announcement devices.
● 'Counter control group': Registration of fire alarms and test activities.
Each control group has one or more control elements including one or more inputs
(Causes) and one or more outputs (Effects).
You will find more information on control groups in the following chapters.
12.1 Creating control tree
1. Select 'Control' > 'Station' in the task card.
2. Create a 'Control group' element for the 'Station'.
3. Enter customer texts.
4. Create a control element for the 'Control group'.
5. Enter customer texts.
Several
elements are already created for '
Stations
' with the template 'Alarming
pre-configured', e.g. 'Alarming control group' with pre-configured 'RT controls'.
See also
2 Create element [➙ 68]