Siemens FS720 - 13 Operation Task Card; Global System Configuration; System Behavior

'Operation' task card
Global system configurat
ion
13
255 |
412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
13 'Operation' task card
The 'Operation' task card contains the logical elements for the global system
configuration and for configuring the operation and indication units.
13.1 Global system configuration
The element 'Global system configuration' is available once per ↑ 'Site' and
contains the following elements:
● 'Global behaviour'
● 'Global PIN configuration'
● 'Country settings'
● 'Global system time'
You will find information on this in the following chapters.
13.1.1 System behavior
The 'Global behaviour' element contains the settings for the system behavior:
● 'Events': The event categories in the system are displayed with the
corresponding properties.
● 'Commands': The system commands are displayed with the corresponding
access levels.
Properties for 'Global behaviour' on the 'Overview' tab
'System wide isolation of all buzzers enabled'
This setting specifies whether the 'Buzzers' of all 'Stations' can be switched off
system-wide with a command.