Siemens FS720 - Element LED Ind.;MIMIC 48 Leds

'Operation' task card
LED indicator FTO2002 and mimic display driver FT2001
13
290 | 412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
13.5.2 Element 'LED ind./mimic 48 LEDs'
Assigning events
Figure 124: 'New cause dialog' window for assigning a 'Visibility' of the 'LED ind./mimic 48 LEDs'
element to an event
To assign the 'LED ind./mimic 48 LEDs' element to an event, proceed as follows:
1. Select the 'Operation' task card.
2. Open 'LED ind./mimic 48 LEDs' in the tree view.
3. Highlight a 'Visibility' element.
4. In the 'Assign dialog' window, highlight an event category, e.g., 'All technical
messages'.
5. Select an element from the tree you want, e.g., 'Technical zone' from the
↑ Detection tree.
6. Click on 'Assign'.
a The 'Visibility' element of 'LED ind./mimic 48 LEDs' is assigned to the event
category.
7. Repeat these steps for each 'Visibility' element (each 'Visibility' element
corresponds to one of the 48 LEDs, from top to bottom).