Siemens FS720 - Updating the Firmware of the Peripheral Devices; Converting a Station

Updating the firmware
Updating the firmware of the peripheral devices
8
112 | 412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
8.2 Updating the firmware of the peripheral devices
You can update the firmware of the following peripheral devices:
● Floor repeater terminal FT2010
● Floor repeater display FT2011
● Radio gateway FDCW221
● Mimic display driver FT2001-A1
● MCL-USB adapter FDUZ221
● Line tester FDUL221
To connect a peripheral device to the PC, you need the MCL
-
USB adapter.
You will find more information in document A6V10210416. See chapter 'Applicable
documents'.
See also
2 Applicable documents [➙ 13]
8.3 Converting a station
The 'Replace element' function is used to convert a configuration from a small
station type to a larger station type.
The following conversions are possible:
● FC722 to FC723 or FC724 or FC726
● FC723 to FC726
● FC724 to FC726
The possible conversions are determined by the
↑
BDV used and
may differ from
those shown above.
How to convert a ↑ 'Station'
w A 'Station' of type FC722, FC723 or FC724 is available.
1. Select the 'Station' to be converted.
2. In the menu, click on 'Edit' > 'Replace element'.
3. Select the target station type for the conversion.
4. Confirm your selection with 'Yes'.
a The configuration of the 'Station' has been converted.
Conversion log
The critical conversions are logged for the converted 'Station'. The logs can be
viewed in the 'Conversion log' window or printed from the log file.