12
176 | 412
12.2 Alarming control group
The alarming control group includes the following control elements:
● 'Internal sounder control'
● 'External sounder control'
● 'RT fire control'
● 'RT fault control'
● 'RT 1 control' to 'RT 8 control'
● 'RT device control'
Figure 61: Alarming control group
● The causes of the elements are assigned to the event verification of the
↑ station.
● The ↑ effects of the different 'RT' elements are assigned to the corresponding
on-board I/Os, the fire brigade periphery module or the I/O card
(programmable). A confirmation input can be assigned to the effects.
● The effects of the 'Sounder' elements can be assigned to the base sounder or
↑ loop sounder on the C-NET detector line or to the corresponding on-board
I/Os, the fire brigade periphery module, or the I/O card (programmable).
● A fault input and a confirmation input can be assigned to the 'RT device
control'.
To Next Page
Loading...
