Siemens FS720 - Page 156

'Detection' task card
'Zone'
11
156 | 412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
Assigning 'Sprinkler zone' element
The 'Sprinkler zone' element has the 'Causes' channel for connecting the 'Input
'Sprinkler 1'' and 'Input 'Sprinkler 2'' contacts of the sprinkler station and the
'Referenced flow switch zones' channel, which is assigned to the flow rate indicator
zone.
To assign 'Input 'Sprinkler 1'', proceed as follows:
l Assign 'Causes' under 'Sprinkler zone' to an input. Link [➙ 76]
To assign 'Input 'Sprinkler 2'', proceed in the same way.
To assign 'Referenced flow switch zones', proceed as follows:
l Assign 'Referenced flow switch zones' under 'Sprinkler zone' to a 'Flow switch
zone'. Link [➙ 76]
See also
2 'Flow switch zone' [➙ 154]