Person Machine Interface (PMI)
13
270 | 412
Assigning to a command for a specific element
If you select a command on the left in the window, you can select a tree and the
element on the right in the window for which the command is to be executed.
Figure 97: Assigning a standard key or a favorite to a command and an element
Assigning to a command for a 'Zone'
If you select 'Command/element category' on the left in the window, you can select
a command from the list on the right in the window. The command can be applied
for 'Zones'.
Figure 98: Assigning a standard key or a favorite to a command and an element category
You can also assign the '
category' functions via the 'New element' window.
To Next Page
Loading...
