Siemens FS720 - Page 287

'Operation' task card
Floor repeater terminal FT2010 and floor repeater display FT2011
13
287 |
412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
Assigning the LED ID to the LED
The figures below show the assignment of the LED ID to the corresponding
configurable LED on the ↑ Person Machine Interface of the ↑ floor repeater
terminal and ↑ floor repeater display. The numbers correspond to the LED ID.
Figure 119: Assigning the LED ID to the LED on the Person Machine Interface of the floor repeater
terminal
Figure 120: Assigning the LED ID to the LED on the Person Machine Interface of the floor repeater
display
You will find the LED ID in the detail editor of the LED in the 'LED ID' field.
Figure 121: Detail editor of a LED with details of the LED ID
6
5
2
1
3
4
1