Siemens FS720 - Page 316

'Network' task card
Network configuration
14
316 | 412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
'Ethernet sub-net'
Configure the 'Ethernet sub-net' as follows:
1. In the tree view of the 'Network' task card, open the 'Global system
configuration' > 'FS720 network configuration' elements.
2. Highlight 'Ethernet sub-net'.
3. Enter the network mask (4 groups of digits, separated by dots) in the 'Netmask'
field.
4. Open 'Ethernet sub-net' > 'Connections'' in the tree view.
5. Highlight all 'Fx72x/Ethernet' one after the other.
6. Enter the IP address in the 'Overview' tab of the detail editor.
'SAFEDLINK sub-net'
1. Open the 'Global system configuration' > 'FS720 network configuration' >
'Ethernet sub-net' elements in the tree view of the 'Network' task card.
2. Highlight 'SAFEDLINK sub-net'.
3. Enter the network mask (4 groups of digits, separated by dots) in the 'Netmask'
field.
4. Open 'SAFEDLINK sub-net' > 'Connections'' in the tree view.