Siemens FS720 - Page 318

'Network' task card
Network configuration
14
318 | 412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
Entering route in the GAP
● Route via 'Security module (firewall) FN2009-A1' to 'Destination address'
– 'Destination address': 10.169.29.0
– 'Netmask': 255.255.255.0
– 'Gateway': Internal IP address of the 'Security module (firewall) FN2009-A1'
– 192.168.100.10
Enter the routes in the GAP as follows:
1. Select the 'Network' task card.
2. Open 'Global system configuration' > 'FS720 network configuration' > 'Ethernet
sub-net' > 'Functions' > 'GAP'.' in the structure tree.
3. Highlight 'Routes'.
4. Enter the network data.
Figure 145: Route in the GAP
Entering route in the Ethernet sub-net
● Route via GAP to 'Destination address' PC/management station
– 'Destination address': 10.169.29.0
– 'Netmask': 255.255.255.0
– ↑ 'Gateway': Ethernet address of the GAP – 192.168.100.1
Enter the routes in the Ethernet sub-net as follows:
1. Select the 'Network' task card.
2. Open 'Global system configuration' > 'FS720 network configuration' > 'Ethernet
sub-net' in the structure tree.
3. Highlight 'Routes'.
4. Enter the network data.
Figure 146: Route in the Ethernet sub-net