Siemens FS720 - Page 323

'Network
' task card
Network configuration
14
323 |
412
Building Technologies
A6V10210424_j_en_
--
Fire Safety
2018
-
08
-
29
6. Assign the FG2004 Station to the 'Standard visibility' element using 'Assign'.
Optional: If required, assign visibility of the FG2004 Station to other stations
with a 'PMI'.
7. Highlight the following element in the 'Operation' task card: 'Site' > 'Global
system configuration' > 'Global behaviour'
8. In the 'Details' tab under 'Event 'Cloud gateway connection fault' enabled' and
'Event 'Connection to cloud lost' enabled', set whether events relating to the
connection to the cloud gateway FG2004 are to be displayed on the 'PMI' or
not. Information: The 'Cloud gateway connection fault' event is not a system
error, but is issued for information purposes only.
You will find information about these properties in chapter 'System behavior
[➙ 255]'.
See also
2 Configuring a 'Station' as a router station [➙ 313]
2 System behavior [➙ 255]