5
61 |
Building Technologies
'Assign' function
When elements are assigned with the 'Assign' function, the 'Stations' that are not
loaded are shown in gray. If you would like to create an ↑ assignment to an
element of a 'Station' that is not loaded, you must click on the 'Station' to load it.
Figure 15: Window with stations that are and are not loaded
The buttons below can be used to navigate through the list of elements that can be
assigned in sequence. Elements that are not loaded are then loaded.
See also
2 Error indication and problem identification [➙ 55]
2 Finding and replacing [➙ 86]
2 Editing 'site' properties [➙ 65]
To Next Page
Loading...
