3
Description
3.1 FUS1010 features
Description
The Siemens SITRANS FUS1010 IP65 NEMA 4X & NEMA 7 flow meters achieve highly
accurate flow measurement owing to the WideBeam ultrasonic transit-time technology. The
sensors are mounted on the outside of the pipe, preventing contact with the medium.
The sensor construction makes installation and commissioning of even the largest sizes very
straight forward and easy. The sensors deliver true multi-parameter measurements i.e.
volume flow, density and temperature.
Note
This op
erating Instructions manual applies to the following FUS1010 IP65 NEMA 4X &
NEMA 7 operating systems: Version 3.02.00 and later and version 5.03.00 and later.
3.2 NEMA 4X and NEMA 7 Transmitters
SITRANS FUS1010 Transmitters
The SITRANS FUS1010 NEMA 4 and NEMA 7 series transmitters are available in Dual Path
and Multi-Path versions. The transmitters include a graphic display providing flow rate,
diagnostics data and keypad interface to access on-screen software setup menus. Safety
agency approved SITRANS FUS1010 series transmitters have hazardous area certification
as indicated in the label examples below.
FUS1010 IP65 NEMA 4X & IP66 NEMA 7
Operating Instructions, 01/2013, A5E02951520-AC
21
To Next Page
Loading...
Need help?
General
