Siemens FUS1010 User Manual

Commissioning
6.4 Installation Menus
FUS1010 IP65 NEMA 4X & IP66 NEMA 7
Operating Instructions, 01/2013, A5E02951520-AC
91
Level A Level B Level C Level D (see
manual)
Level E Level F
Est LogTime Left View Only
Clear Logger Yes/No
Memory
Control
Log Memory Left View Only
Memory Map Yes/No
Defragment Yes/No
Analog Out
Trim
Trim Io1 Operate / Trim @
4mA
Trim Io2 Operate / Trim @
4mA
Trim Vo1 Operate / Trim @
2V
Trim Vo2 Operate / Trim @
2V
Trim Pgen1 Operate / Trim @
1kHz
Trim Pgen2 Operate / Trim @
1kHz
RTD Calibrate RTD1 Factory / User Cal
RTD2 Factory / User Cal
Clock Set Date (MM.DD.YY) Edit Date
Time (HH.MM) Edit Time
RS-232 Setup Baud Rate Enter From List
Parity Enter From List
Data Bits 7/8
Line Feed Yes/No
Network ID Numeric Entry
RTS Key Time Enter From List
Backlight Enter From List
System Info Version View Only
Reset Data/Time View Only mm.dd.yy.hh.mm.ss
Op System P/N View Only
Checksum View only
Code View Only
System Time View Only mm.dd.yy.hh.mm.ss
Language Enter From
List

Siemens FUS1010 Specifications

General

Brand	Siemens
Model	FUS1010
Category	Measuring Instruments
Language	English