Siemens RUGGEDCOM ROS - Adding an RMON Alarm

RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Adding an RMON Alarm 91
Section 3.10.2.2
Adding an RMON Alarm
To add an RMON alarm, do the following:
1. Navigate to Ethernet Stats » Configure RMON Alarms. The RMON Alarms table appears.
1
Figure 54: RMON Alarms Table
1. InsertRecord
2. Click InsertRecord. The RMON Alarms form appears.
14
12
13
1
2
3
4
5
6
7
8
9
10
11
Figure 55: RMON Alarms Form
1. Index Box 2. Variable Box 3. Rising Thr Box 4. Falling Thr Box 5. Value Box 6. Type Options 7. Interval Box 8. Startup
Alarm List 9. Rising Event Box 10. Falling Event Box 11. Owner Box 12. Apply Button 13. Delete Button 14. Reload Button
3. Configure the following parameter(s) as required: