Siemens RUGGEDCOM ROS User Manual

RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Viewing Local Logs 51
The following sections describe how to configure and manage logs:
• Section 3.5.1, “Viewing Local Logs”
• Section 3.5.2, “Clearing Local Logs”
• Section 3.5.3, “Configuring the Local System Log”
• Section 3.5.4, “Managing Remote Logging”
Section 3.5.1
Viewing Local Logs
The local crash and system logs can both be downloaded from the device and viewed in a text editor. For more
information about downloading log files, refer to Section 3.4, “Uploading/Downloading Files”.
To view the system log through the Web interface, navigate to Diagnostics » View System Log. The syslog.txt
form appears.
Figure 11: syslog.txt Form
Section 3.5.2
Clearing Local Logs
To clear both the local crash and system logs, log in to the CLI shell and type:
clearlogs
To clear only the local system log, log in to the Web interface and do the following:
1. Navigate to Diagnostics » Clear System Log. The Clear System Log form appears.
1
Figure 12: Clear System Log Form
1. Confirm Button
2. Click Confirm.

Siemens RUGGEDCOM ROS Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS
Category	Control Unit
Language	English