Siemens RUGGEDCOM ROS User Manual

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
172 Managing MAC Addresses
Parameter Description
CoS Synopsis: { Normal, Medium, High, Crit }
Default: Normal
Class of Service assigned to received frames with the specified DSCP.
4. Click Apply.
5. Configure the CoS parameters on select switched Ethernet ports as needed. For more information, refer to
Section 5.4.2, “Configuring Classes of Service for Specific Ethernet Ports”.
Section 5.5
Managing MAC Addresses
The following sections describe how to configure and manage MAC addresses:
• Section 5.5.1, “Viewing a List of MAC Addresses”
• Section 5.5.2, “Configuring MAC Address Learning Options”
• Section 5.5.3, “Configuring MAC Address Flooding Options”
• Section 5.5.4, “Managing Static MAC Addresses”
• Section 5.5.5, “Purging All Dynamic MAC Addresses”
Section 5.5.1
Viewing a List of MAC Addresses
To view a list of all static and dynamically learned MAC addresses, navigate to MAC Address Tables » View
MAC Addresses. The MAC Addresses table appears.

Siemens RUGGEDCOM ROS Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS
Category	Control Unit
Language	English