Siemens RUGGEDCOM ROS User Manual

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Managing Security-to-Group Mapping 187
Figure 131: SNMP Users Table
2. Select the user from the table. The SNMP Users form appears.
12
10
11
9
8
7
6
5
4
3
2
1
Figure 132: SNMP Users Form
1. Name Box 2. IP Address Box 3. v1/v2c Community Box 4. Auth Protocol Box 5. Priv Protocol Box 6. Auth Key Box
7. Confirm Auth Key Box 8. Priv Key Box 9. Confirm Priv Key Box 10. Apply Button 11. Delete Button 12. Reload Button
3. Click Delete.
Section 5.7.2
Managing Security-to-Group Mapping
The following sections describe how to configure and manage security-to-group maps, refer to the following:
• Section 5.7.2.1, “Viewing a List of Security-to-Group Maps”
• Section 5.7.2.2, “Adding a Security-to-Group Map”

Siemens RUGGEDCOM ROS Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS
Category	Control Unit
Language	English