Siemens RUGGEDCOM ROS User Manual

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Configuring MAC Address Learning Options 173
Figure 115: MAC Address Table
If a MAC address is not listed, do the following:
• Configure the MAC address learning options to control the aging time of dynamically learned MAC addresses
of other devices on the network. For more information, refer to Section 5.5.2, “Configuring MAC Address
Learning Options”.
• Configure the address on the device as a static MAC address. For more information, refer to Section 5.5.4.2,
“Adding a Static MAC Address”.
Section 5.5.2
Configuring MAC Address Learning Options
The MAC address learning options control how and when MAC addresses are removed automatically from the
MAC address table. Individual addressees are removed when the aging timer is exceeded. Addresses can also
be removed when a link failure or topology change occurs.
To configure the MAC address learning options, do the following:
1. Navigate to MAC Address Tables » Configure MAC Address Learning Options. The MAC Address
Learning Options form appears.

Siemens RUGGEDCOM ROS Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS
Category	Control Unit
Language	English