Siemens S120 - Mounting Dimensions and Tightening Torques

Power Modules
4.2 Blocksize Power Modules (PM240-2)
AC Drive
104 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
4.2.5.1
Mounting dimensions and tightening torques
The mounting dimensions and the tightening torques for fixing the Power Modules are
specified in the following table.
Table 4- 6 PM240-2, dimensions and tightening torques for mounting
Frame size
Height, width, depth (without Control Unit)
Fastening
Tightening torque
Without shield
connection plate
With shield connection
plate
FSA
mm
196 x 73 x 165
276 x 73 x 165
3 x M4 studs,
3 x M4 nuts,
3 x M4 washers
2.5 Nm with
washers
inserted
Inch 7.72 x 2.87 x 6.50 10.87 x 2.87 x 6.50
FSB
mm
291 x 100 x 165
370 x 100 x 165
4 x M4 studs,
4 x M4 nuts,
4 x M4 washers
2.5 Nm with
washers
inserted
Inch 11.46 x 3.94 x 6.50 14.57 x 9.94 x 6.50
FSC
mm
355 x 140 x 165
409 x 140 x 165
4 x M5 studs,
4 x M5 nuts,
4 x M5 washers
3.0 Nm with
washers
inserted
Inch 13.98 x 5.51 x 6.50 16.10 x 5.51 x 6.50
Table 4- 7 PM240-2 Push Through, dimensions and tightening torques for mounting
Frame size
Height, width, depth (without Control Unit)
Fastening
Tightening torque
Without shield
connection plate
With shield connection
plate
FSA
mm
238 x 126 x 171
322 x 126 x 171
6 x M5 studs,
6 x M5 nuts,
6 x M5 washers
3.5 Nm with
washers
inserted
Inch 9.37 x 4.96 x 6.73 12.68 x 4.96 x 6.73
FSB
mm
345 x 154 x 171
430 x 154 x 171
8 x M5 studs,
8 x M5 nuts,
8 x M5 washers
3.5 Nm with
washers
inserted
Inch 13.58 x 6.06 x 6.73 16.93 x 6.06 x 6.73
FSC
mm
411 x 200 x 171
500 x 200 x 171
8 x M5 studs,
8 x M5 nuts,
8 x M5 washers
3.5 Nm with
washers
inserted
Inch 16.18 x 7.87 x 6.73 19.69 x 7.87 x 6.73