Mains connection and line-side power components
3.8 Line reactors
AC Drive
64 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
Mounting
Blocksize line reactors for PM240-2
The line reactors for Power Modules PM240-2 of frame sizes FSA to FSC are designed for
installation in a cabinet. The line reactor is installed on the mounting surface next to the
Power Module. The line reactor is connected to the line supply through terminals.
Table 3- 12 Connecting the line reactor for the PM240-2 on the mounting surface
4 x M5 screws
4 x M5 nuts
6 Nm
FSB
FSC 4 x M6 screws
4 x M6 nuts
10 Nm
To Next Page
Loading...
