Siemens S120 - Technical Data

Accessories
9.1 DRIVE-CLiQ cabinet bushing
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
397
Installation
1. Insert the DRIVE-CLiQ cabinet bushing through the opening in the cabinet.
2. Fasten the DRIVE-CLiQ cabinet bushing using the associated O ring with a tightening
torque of 3 to 4 Nm
①
Flange, SW18
②
Seal
③
Cabinet panel
④
O ring, SW20, tightening torque: 3 to 4 Nm
Figure 9-9 Mounting DRIVE-CLiQ cabinet bushings for cables with M12 connectors
9.1.5
Technical data
Table 9- 1 Technical data of DRIVE-CLiQ cabinet bushings
Unit
6SL3066-2DA00-0AA0
DRIVE-CLiQ
6FX2003-0DT67
M12
Weight
kg
0.165
0.035
Degree of protection
according to
EN 60529
IP54 outside the control cabinet
IP20 or IPXXB inside the
control cabinet
IP67