Mains connection and line-side power components
3.7 Line filter
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
53
The line filters are designed as base components. The line filter is retained on the mounting
surface and the Power Module is mounted on the line filter in a space-saving fashion. The
cables to the Power Modules are already connected at the line filter. The line filter is
connected to the line supply through terminals.
PM240-2 Power Module, frame size FSA
Figure 3-8 Installation example: Power Module PM240-2 (frame size FSA) with screening kit and
line filter
Table 3- 2 Connecting the line filter for the PM240-2 on the mounting surface
4 x M4 bolts
2.5 Nm
To Next Page
Loading...
