Siemens S120 - Power Loss of Components in Rated Operation; General; Power Loss of Control Units, Control Unit Adapters and Sensor Modules

Cabinet design and EMC for components, Blocksize format
10.9 Information on control cabinet cooling
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
447
10.9.3
Power loss of components in rated operation
10.9.3.1
General
The tables below show the power loss for components during rated operation. The
characteristic values apply for the following conditions:
● Line supply voltage for Power Modules 1-ph. 200 V AC to 3-ph. 380 V to 480 V AC ±10
%.
● Rated pulse frequency of Blocksize Power Modules, 4 kHz
● Rated pulse frequency of Power Modules Chassis, 2 kHz
● Operating components at their unit rating
10.9.3.2
Power loss of Control Units, Control Unit Adapters and Sensor Modules
Table 10- 21 Overview of power loss during rated operation for Control Units, Control Unit Adapters,
Sensor Modules
Component
Unit
Power loss
Control Units
CU310-2 DP
W
< 20
CU310-2 PN
W
20
Control Unit Adapter
CUA31
W
2,4
CUA32
W
2,6
Sensor Modules
SMC10
W
< 10
SMC20
W
< 10
SMC30
W
< 10