Siemens S120 - Mounting Control Units and Control Unit Adapters

Control Units, Control Unit Adapters and operating components
7.7 Mounting Control Units and Control Unit Adapters
AC Drive
332 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
7.7
Mounting Control Units and Control Unit Adapters
Power Modules Blocksize
Control Unit (CU310-2 PN / DP) and Control Unit Adapter (CUA31 / CUA32) can be mounted
onto Power Modules Blocksize of any size. Communication between the devices is realized
via the PM-IF interface.
Mounting
1. Mount the Control Unit / the Control Unit Adapter on the PM.
2. Press the Control Unit / the Control Unit Adapter back until it latches into the blue
interlocking lug.
The diagrams show the Control Unit / Control Unit Adapter mounted on the PM340 (frame
size FSD), using the CU310-2 PN as an example.
Placing the CU310-2 PN on the PM340
PM340 with CU310-2 PN fitted