Siemens S120 - Motor Connection; Safe Brake Relay Connection

Power Modules
4.3 Power Modules Blocksize (PM340)
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
133
Note
To connect the cable lugs of the brake resistor cable to
a PM340 Power Module frame size
FSA it is necessary to nip the lug on connection R2 off using a diagonal cutter tool. Take
great care to ensure that no pieces of plastic fall into the housing.
4.3.3.5
Motor connection
Table 4- 19 Terminal block, motor connection
Terminal
Technical data
PE connection
U2
Motor phase U
V2
Motor phase V
W2 Motor phase W
4.3.3.6
Safe brake relay connection
Table 4- 20 Plugs
Terminal
Designation
Technical data
1
Low
Low-signal safe brake relay to PM340
2 High High-signal safe brake relay to PM340
Note
For further information, see Section
Option module Safe Brake Relay (Page 378).