Control Units, Control Unit Adapters and operating components
7.8 Basic Operator Panel BOP20
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
337
Damage when using the BOP
The interface for the BOP20 on the CU310-2 may be damaged when the BOP20 is used.
• Make sure that you insert and withdraw the BOP20 straight into/out of the CU310-2 and
that it is not tilted up or down.
The diagrams show how to mount the Basic Operator Panel BOP20 on a CU310-2.
1. To remove the blanking cover,
press the latching cams of the
cover together simultaneously and
pull the cover straight out.
2. Press the latching cams on the
BOP20 together simultaneously
and push the BOP20 straight
into the housing of the CU310-2
until you hear it latch into
CU310-2 with mounted BOP20.
To Next Page
Loading...
