Siemens S120 - Line Supply Connection; Braking Resistor and DC Link Connection

Power Modules
4.3 Power Modules Blocksize (PM340)
AC Drive
132 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
4.3.3.3
Line supply connection
Table 4- 16 Terminal block, line supply connection 200 V to 240 V 1 AC
Terminal
Signal name
Technical data
1
L
Line phase L
2 N Line phase N
Max. conductor cross-section: 2.5 mm²
Table 4- 17 Terminal block, line supply connection 380 V to 480 V 3 AC
Terminal
Signal name
Technical data
1
U1/L1
Line conductor L1
2 V1/L2 Line conductor L2
3
W1/L3
Line conductor L3
4 PE PE connection
4.3.3.4
Braking resistor and DC link connection
Table 4- 18 Terminal block, braking resistor, and DC link connection
Terminal
Technical specifications
DCN
DC link negative
DCP/R1
DC link positive and positive connection for braking resistor
R2 Negative connection for the braking resistor