Control Units, Control Unit Adapters and operating components
7.3 Control Unit CU310-2 PN (PROFINET)
AC Drive
286 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
OUT > 5 V
Orange Continuous light The voltage of the electronics power supply for
the measuring system is 24 V.
1)
Make sure that the encoder connected is designed for a 24 V supply. Connecting a 5 V encoder to a 24 V supply can
result in destruction of the encoder electronics.
Figure 7-8 Dimension drawing, Control Unit CU310-2 PN, all data in mm (inches)
To Next Page
Loading...
