Siemens S120 - Installing a Braking Module in a Power Module, Frame Size GX

DC link components
5.2 Chassis
AC Drive
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
201
5.2.1.10
Installing a Braking Module in a Power Module, frame size GX
①
Loosen the two M6 screws.
Remove the front cover to the top.
②
Loosen the two screws from the cover plate at the top and
the M6 nut on the left-hand side.
Remove the cover plate at the left.
③
Loosen the four screws from the cover plate at the top and
the three securing screws at the rear.
Remove the cover plate at the top.