Siemens S120 - Page 146

Power Modules
4.3 Power Modules Blocksize (PM340)
AC Drive
146 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
Line voltage 1-phase 200 … 240 VAC ± 10%
PM340
6SL3210–
1SB11-0UA0
1SB12-3UA0
1SB14-0UA0
PM340 with integrated line filter
6SL3210–
1SB11-0AA0
1SB12-3AA0
1SB14-0AA0
Max. cable length
to braking resistor
m
15
15
15
Line supply connectionL, N
Screw terminals for cable cross-sections 1.0 to 2.5 mm
2
Motor connection U2, V2, W2
DC-link connection, connection for
braking resistorDCP/R1, DCN, R2
PE connection
At the housing with M4 screw
Max. motor cable length
3)
(without external options)
m 50 (shielded)
75 (unshielded)
Degree of protection
IP20 or IPXXB
Weight
kg
1,2
1,3
1,3
1)
Rated output of a typical standard induction motor at 230 V.
2)
The i
nput current depends on the motor load and line impedance. The input currents apply for a load with the type rating
(based on I
rated
) for a line impedance corresponding to u
k
= 1%.
3)
Max. motor cable length 15 m (shielded) for PM340 Power Modules with integrated line filter to maintain the limit values
of EN 61800-3 Category C2.