EasyManua.ls Logo

Siemens S120 - Page 36

Siemens S120
500 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System overview
2.5 System data
AC Drive
36 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
Table 2- 2 Environmental conditions
Degree of protection
IPXXB according to EN 60529, open type according to UL 508
Protection class, line supply circuits
Electronic circuits
I (with protective conductor connection)
safety extra-low voltage PELV / SELV
Type of cooling
Internal air cooling,
power units with forced air cooling using an integrated fan
Permissible cooling medium temperature (air)
and installation altitude in operation
0° C to +40° C and an installation altitude of up to 1000 m without
derating,
>40° C to +55° C, see derating characteristics
Installation altitude >1000 m to 4000 m refer to the characteristic for
current derating or
reduction of the ambient temperature by 3.5 K per 500 m.
Chemically active substances
Long-term storage in the transport packaging
Class 1C2 according to EN 60721-3-1
Transport in the transport packaging
Class 2C2 according to EN 60721-3-2
Operation
Class 3C2 according to EN 60721-3-3
Biological environmental conditions:
Storage in the transport packaging Class 1B1 according to EN 60721-3-1
Transport in the transport packaging
Class 2B1 according to EN 60721-3-2
Operation
Class 3B1 according to EN 60721-3-3
Vibratory load
Long-term storage in the transport packaging
Class 1M2 according to EN 60721-3-1
Transport in the transport packaging
Class 2M3 according to EN 60721-3-2
Shock load
Long-term storage in the transport packaging
Class 1M2 according to EN 60721-3-1
Transport in the transport packaging
Class 2M3 according to EN 60721-3-2
Operation
Class 2M2 according to EN 60721-3-2
Blocksize format FSA to FSB
Test values: 147 m/s
2
(15g)/11 ms
Blocksize format FSC to FSF
Test values: 49 m/s
2
(5g)/30 ms
Chassis format
Test values: 98 m/s
2
(10g)/20 ms
Climatic ambient conditions
Long-term storage in the transport packaging Class 1K4 according to EN 60721-3-1
Temperature: -25° C to +55° C
Transport in the transport packaging Class 2K4 according to EN 60721-3-2
Temperature: -40° C to +70° C
Operation Class 3K3 according to EN 60721-3-3
Temperature +0° C to +40° C
Relative humidity: 5% to 90%
Oil mist, salt mist, ice formation, condensation, dripping water, spray,
splash water, water jets are not permitted
Table 2- 3 Certificates
Declarations of Conformity
CE (Low-Voltage and EMC Directive)
Approvals cULus
cURus

Table of Contents

Other manuals for Siemens S120

Related product manuals