Siemens S120 - Page 8

Foreword
AC Drive
8 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
The EC Declaration of Conformity for the Low Voltage Directive can be found on the Internet
at:
http://support.automation.siemens.com
There – as a search term – enter the number
22383669
.
Note
When operated in dry areas, SINAMICS S units conform to the Low
-Voltage Directive
2006/95/EC.
Note
SINAMICS S units comply with the EMC Directive 2004/108/EC in the configuration specified
in the associated EC Declaration of Conformity for EMC and when the EMC installation
guideline provided in the Configuration Manual with Order No. 6FC5297
-0AD30-0xPx is
implemented.
Note
The E
quipment Manual describes a desired state which, if maintained, ensures the required
level of operational reliability and compliance with EMC limit values.
Should there be any deviation from the requirements in the manual, appropriate actions (e.g.
measure
ments) must be taken to check/prove that the required level of operational reliability
and compliance with EMC limit values are ensured.
EMC limit values in South Korea
The EMC limit values to be complied with for South Korea correspond to the limit values of
the EMC product standard for variable-speed electric drives EN 61800-3, Category C2 or
limit value class A, Group 1 according to EN55011. By applying suitable supplementary
measures, the limit values according to Category C2 or according to limit value class A,
Group 1 are maintained. Further, additional measures may be required, for instance, using
an additional radio interference suppression filter (EMC filter). The measures for EMC-
compliant design of the system are described in detail in this manual and in the
Configuration Manual "EMC installation guideline."
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the Installation Guideline EMC.
Please note that the final statement on compliance with the standard is always provided on
the label attached to each unit.
Spare parts
Spare parts are available on the Internet at:
http://support.automation.siemens.com/WW/view/de/16612315