Siemens SIMATIC S7-200 - Connector Terminal Identification for CPU 226 DC;DC;DC; Connector Terminal Identification for CPU 226 Ac;DC;Relay

S7-200 Specifications
A-25
S7-200 Programmable Controller System Manual
A5E00066097-02
DC
1.6
L+
2M0.7
1.4 2.7
1.7
M 0.3
+
1K Ω
Note:
1. Actual component values may vary.
2. Either polarity accepted.
3. Optional ground.
+
5.6K Ω
24 VDC Power
0.0 0.1 0.21L+
24 VDC
36V
24 VDC Power, Ground and Output Terminals
24 VDC Common and 24 VDC Input Terminals
0.4 2L+
2.0 2.11M 0.0 0.1 0.2 0.3 M0.4 0.5 0.6 2M1.0 1.1 1.2 1.30.7 1.5
Sensor Power Output
+
0.5 0.6
2.2 2.3 2.4 2.5 2.6
ML+
1.6 1.7
1.0 1.1 1.2 1.3 1.4 1.5
 
+

+



Figure A-8 Connector Terminal Identification for CPU 226 DC/DC/DC
ACL1
2.71.4 M L+
1K Ω
5.6K Ω
120/240 VAC
1L 0.0 0.1 0.2 0.3 N
24VDC
Commons and Relay Output Terminals
24VDC Common and 24VDC Input Terminals
2L 0.5 0.6 3L0.7 1.0
1M 0.0 0.1 0.2 0.3 0.4 0.5 0.6 2M 2.0 2.1 2.2 2.30.7 2.4 2.5
0.4 1.1

Sensor
Power
Output
1.2 1.3 1.4 1.5 1.6 1.7
2.61.0 1.1 1.2 1.3 1.5
1.6
1.7
Note:
1. Actual component values may vary.
2. Connect AC line to the L terminal.
3. Either polarity accepted.
4. Optional ground.

++

Figure A-9 Connector Terminal Identification for CPU 226 AC/DC/Relay