Motor Modules Booksize Compact
5.5 Assembly
Booksize power units
Manual, (GH2), 06/2008, 6SL3097-2AC00-0BP6
391
To improve heat transfer, a heat-conducting medium must be used. Special spherical-
indented heat-conducting film must be used for this purpose. Every cold plate power unit is
supplied with heat-conducting film cut to the right size. The installation position of the
thermally conductive foil must be taken into account.
Note
When a component is replaced, the heat-conducting film must also be replaced! Only heat-
conducting film approved or supplied by Siemens may be used.
Order number
Heat-conducting foil, 50 mm 6SL3162-6FB01-0AA0
Heat-conducting foil, 75 mm 6SL3162-6FC01-0AA0
To Next Page
Loading...
