Siemens SINAMICS S120 - DRIVE-Cliq Coupling; Description; Safety Information; Interface Description

Accessories
8.6 DRIVE-CLiQ coupling
Booksize power units
Manual, (GH2), 06/2008, 6SL3097-2AC00-0BP6
489
8.6 8.6 DRIVE-CLiQ coupling
8.6.1 Description
The DRIVE-CLiQ coupling is used to connect two DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to EN 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
8.6.2 Safety information
Note
Only Siemens cables should be used for DRIVE-CLiQ connections.
8.6.3 Interface description
8.6.3.1 Overview




Figure 8-22 DRIVE-CLiQ coupling
1 DRIVE-CLiQ coupling
2 Rating plate
3 Centering caps, Yamaichi, order no.: Y-ConAS-24-S