Siemens SINAMICS S120 - Assignment of Autotransformers to Smart Line Modules

Line Connection Booksize
2.13 Line connection variants
Booksize power units
130 Manual, (GH2), 06/2008, 6SL3097-2AC00-0BP6
2.13.3.5 Assignment of autotransformers to Smart Line Modules
Table 2-46 Autotransformers for 480/440 V input voltage
Smart Line Module
5 kW /10 kW /16 kW 36 kW
Rated power [kVA]
Autotransformer IP00 21 46.5
Input voltage [V] 480/440 V AC 3-phase ± 10%; 50 Hz - 5% to 60 Hz + 5%
Output voltage [V] 400 V AC, 3-phase
Vector group Yna0
Permiss. ambient temperature
Operation [°C] -25 to +40, for power de-rating up to +55 °C, ISOKL: H, t
a
= 40
Humidity rating in accordance with DIN
EN 60721-3-3
Cl. 3K5, Condensation and icing excluded
Low air temperature 0 °C (+32 °F)
Degree of protection to EN 60529
(IEC 60529) IP00
Degree of protection IP00: _ → Order No. A
Order No. 4AP2796-0EL40-2X_0 4AU3696-0ER20-2X_0
Power loss [W]
Autotransformer IP00 160 430
Short-circuit voltage uk [%] ≤ 1.5
Conn. cross-section, max.
primary/secondary sides
16 mm
2
35 mm
2
Fuse, primary side 35 A gL 80A gL
Weight [kg], approx. for
Degree of protection IP00 29 52
Terminal arrangement 1U1/1U3/1V1/1V3/1W1/1W3/2U1/2V1/2W1/N
1U1 to 1W1 = 480 V input, 1U3 to 1W3 = 440 V input,
2U1 to 2W1 = 400 V output, N = neutral point