Accessories
8.1 Shield connecting plates
Booksize power units
446 Manual, (GH2), 06/2008, 6SL3097-2AC00-0BP6
8.1.3 Dimension drawings
Figure 8-3 Dimension drawing of shield terminal plate on a 100 mm Line Module with internal air cooling, all dimensions
in mm and (inches)
Note
The shield connecting plate is part of the scope of supply of a 100 mm Line Module.
Recommended shielding connection clamps: from Weidmüller, Order No. KLBÜ CO4
Weidmüller: http://www.weidmueller.com
For Motor Modules 50 mm and 100 mm wide, the motor cable shield is connected through
the motor connector housing.
To Next Page
Loading...
