Siemens SINUMERIK 802D sl Instruction Manual

A.1 List of machine data
Machine and Setting Data 802D
A-204
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
11167 ACCESS_WRITE_CUS
– Right protection for directory /_N_CUS_DIR POWER ON
N01 – DWORD
Default – –1 – – 3/3
11170 ACCESS_WRITE_SACCESS
– Write protection for _N_SACCESS_DEF POWER ON
N01 – BYTE
Default – 7 – – 2/2
11171 ACCESS_WRITE_MACCESS
– Write protection for _N_MACCESS_DEF POWER ON
N01 – BYTE
Default – 7 – – 2/2
11172 ACCESS_WRITE_UACCESS
– Write protection for _N_UACCESS_DEF POWER ON
N01 – BYTE
Default – 7 – – 3/3
11210 UPLOAD_MD_CHANGES_ONLY
– MD backup only for changed MD IMMEDIATEL
Y
N01, N05 – BYTE
Default – 0xFF – – 7/3
plus – 0x0F – – 2/2
11240 PROFIBUS_SDB_NUMBER
– SDB1000 number POWER ON
N01, N05 – DWORD
Default 4 –1, –1, –1, –1 –1 7 2/2
plus – 0, –1, 1, –1 – 1 2/2
11250 PROFIBUS_SHUTDOWN_TYPE
– Profibus Shutdown handling POWER ON
EXP, N01 – BYTE
Default – 0 0 2 2/2
11310 HANDWH_REVERSE
– Threshold for handwheel direction reversal POWER ON
N09 – BYTE
Default – 2 – – 2/2
11320 HANDWH_IMP_PER_LATCH
– Handwheel pulses per locking position POWER ON
N09 – DOUBLE
Default 6 1., 1., 1., 1., 1., 1. – – 2/2
11346 HANDWH_TRUE_DISTANCE
– Handwheel travel or speed specification POWER ON
N01 – BYTE
Default – 0 0 3 2/2
13060 DRIVE_TELEGRAM_TYPE
– Standard message frame type for Profibus DP POWER ON
N04, N10 – DWORD
Default 31 102, 102, 102, 102, 102,
102, 102, 102, 102, 102,
102, 102, 102, 102, 102,
102, 102, 102, 102, 102,
102, 102, 102, 102, 102,
102, 102, 102, 102, 102,
102
– – 2/2

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English