Siemens SINUMERIK 802D sl Instruction Manual

A.1 List of machine data
Machine and Setting Data 802D
A-210
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
22256 AUXFU_ASSOC_M1_VALUE
– Additional M functions for conditional stop POWER ON
C01, C03, C10 – DWORD
Default – –1 – – 2/2
22400 S_VALUES_ACTIVE_AFTER_RESET
– S function active even after RESET POWER ON
C04, C03, C05 – BOOLEAN
Default – FALSE – – 2/2
22410 F_VALUES_ACTIVE_AFTER_RESET
– F function active even after RESET POWER ON
C04, C03, C05 – BOOLEAN
Default – FALSE – – 2/2
22534 TRAFO_CHANGE_M_CODE
– M code when switching the transformation type POWER ON
C04 – DWORD
Default – 0 0 99999999 2/2
22550 TOOL_CHANGE_MODE
– New tool offset with T or M function POWER ON
C01, C11, C04, C09 – BYTE
Default – 0 0 1 2/2
22910 WEIGHTING_FACTOR_FOR_SCALE
– Input resolution for scaling factor POWER ON
EXP, C01, C11 – BOOLEAN
Default – FALSE – – 2/2
22914 AXES_SCALE_ENABLE
– Activation for axial scaling factor G51 POWER ON
EXP, C01, C11 – BOOLEAN
Default – FALSE – – 2/2
22920 EXTERN_FIXED_FEEDRATE_F1_ON
– Activate fixed feedrate F1 – F9 POWER ON
EXP, C01, C11 – BOOLEAN
Default – FALSE – – 2/2
22930 EXTERN_PARALLEL_GEOAX
– Assignment of parallel channel geometry axis POWER ON
EXP, C01, C11 – BYTE
Default 3 0 0 6 2/2
24020 FRAME_SUPPRESS_MODE
– Positions with frame suppression POWER ON
C03 – DWORD
Default – 0x0 0 0x0000003 2/2
24100 TRAFO_TYPE_1
– Transformation 1 in the channel NEW CONF
C07 – DWORD
Default – 0 – – 2/2
24110 TRAFO_AXES_IN_1
– Axis assignment for transformation 1 NEW CONF
C07 – BYTE
Default 20 1, 2, 3, 4, 5, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0...
0 6 7/7
plus 6 – – – 2/2

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English