Siemens SONOLINE G50 - System Configuration - Hardware Screen (A36-2 Not Installed)

Page 16 of 16 7482255 Rev 01 Siemens
October 2002
Installing the G50 Third Array Port
Figure 5-16 System Configuration – Hardware Screen (A36-2 Not Installed)
Note: To confirm the successful removal of the A36 A3RD-2 PCB, verify that “Not
Installed” is displayed in the System Configuration – Hardware screen as shown
in Figure 5-16.
Home
Hardware
Software
Peripheral
System Configuration - Ha rdware
Service
Site
System
HW/SW
Assy No. Assy Name AS No.
A10 OPCT 0
A30 ECGX 101
A36 PSEL Not Install ed
A36- 2 A3RD 2 Not Installed
A40 PAMP Not Install ed
A40- 1 CWRX Not Install ed
A40- 3 RX32 Not Install ed
If A36 A3RD-2 PCB has been
successfully de-installed, “Not Installed” is
shown here.