Page 24 of 42 7482255 Rev 01 Siemens
October 2002
Service Screens and Menus
6.3 System Information Screen
Access the System Information screen shown in Figure 8-13 by selecting the
System button located on the Main Menu screen (Figure 8-10).
The System Information screen displays the Product Name: G50 or G60 S.
Enter the system Serial Number and zero the value of the System Use Time
(elapsed time) from this screen. Consult "Output Data File Structure" (page E-
1) for the number of characters that can be entered into the serial number field.
Select the SET button to display the dialog box shown in Figure 8-14; enter
the system serial number in the dialog box and select OK.
The serial number is recorded in the host module and the E module. A
warning message will be displayed if the serial number of the G50 or the
G60 S recorded on each printed circuit board varies among the circuit
boards.
Figure 8-13 System Information Screen
Service
Home
Site
System
HW / SW
Diagnostics
Log
Service History
Backup / Restore
System Information
Input
System
Product Name Omnia-X
Serial No. 0123456789
System Use Time hhhh:mm:ss
Set
Reset
G60 S
Figure 8-14 Serial Number Message Box
X
Ok Cancel
Serial Number
Please enter the Serial Number
To Next Page
Loading...
