Siemens SONOLINE G50 - Stress Echo Maintenance Screen; Start Dialog Box

Page 12 of 42 7482255 Rev 01 Siemens
October 2002
Installing the Product Feature Keys
10. In the confirmation dialog box displayed (see Figure 8-4), use the trackball
and the SET key to select the OK button.
11. The Stress Echo feature key will be installed and a confirmation dialog box
displayed: Select the OK button in the dialog box to complete the installa-
tion.
12. Verify that the Stress Echo item now appears in the Installed Option list of
the feature installation screen (Figure 8-3).
13. Verify that the Stress Echo menu item now appears in the menu item list of
the Preset screen (Figure 8-2).
14. On the Preset screen, select the Stress Echo menu item and press the SET
key: The Maintenance screen shown in Figure 8-5 will be displayed.
Figure 8-4 Start Dialog Box
Figure 8-5 Stress Echo Maintenance Screen